If you think that you can get away with having faulty plumbing for a while with no significant effects on your home, think again! Faulty plumbing can cause a lot of problems in your home that may not be noticeable at first until it becomes a big problem. Here are four surprisingly negative effects that can happen to your home from faulty plumbing.
Faulty plumbing can cause bad odors in a number of different ways. First, if you have a garbage disposal, the plumbing is supposed to take away the garbage you drop down the drain and wash it out to your septic system. If there is a problem with the plumbing, food can get lodged in the pipes and begin to rot. Bad odors can even make you sick.
Standing water left behind from leaky pipes could attract pests, insects, rodents and cause additional problems. Bugs see standing water as a place to breed. Some bugs lay eggs in or near the water, and other insects simply need water to live. Either way, standing water from a leaky pipe, especially if the pipe is in a hidden spot, gives bugs an ideal environment to thrive in.
Faulty plumbing, especially leaks, can cause your utility bills to increase. Leaking pipes are the most obvious when it comes to this–water flows even when your faucets are off. You may also have to use more water than you would if your plumbing was not leaking. Leaks can also cause your appliances to have to work harder to maintain water flow, which may possibly increase your electric bill.
This may be one of the most important considerations on the list. Faulty plumbing can introduce chemicals, bacteria, germs, and toxins into your water. Pipes may rust and/or corrode and release chemicals into the water supply. A broken underground pipe allows entrance of bugs, dirt, and germs into the water supply. If the faulty plumbing is near your sewage system, you run the risk of harmful bacteria getting into your water supply. All of these can make you or your family extremely ill.
Your plumbing system may be hidden away, but it is a delicate and intricate system that is the heart of your home. It delivers the water you need to survive and takes away the waste that you don’t want. In order to keep your home clean, safe, and comfortable you should take care of faulty plumbing as soon as possible.
In addition to being an expensive problem, a broken sprinkler system can also waste an incredible amount of water. A slow leak could potentially waste hundreds of gallons of water per year and destroy nearby property. Here is a closer look at some of the most commonly encountered sprinkler problems and the steps that you should take to fix them.
Cleaning a clogged sprinkler head is almost always a quick and easy project that requires no special tools. Most sprinkler heads can easily be unclogged with a paperclip or small piece of wire. Clogs usual occur in the small hole just below the lip of the sleeve. If you can’t reach the hole with the paperclip, then you might need to remove the sleeve entirely. Before removing any parts from a sprinkler head, you must first turn off the irrigation water.
A broken sprinkler head is likely to result in pooling water, and soggy soil can create the perfect breeding ground for undesirable pests like mosquitoes. Sprinkler heads generally break when they are run over by a lawnmower or accidentally kicked by someone playing in the yard. After turning off the irrigation water, you will need to scoop out the nearby dirt and cut the new riser to length. The final steps are to flush the line, install the head, and backfill the area.
A cracked irrigation pipe can become an expensive issue if you don’t repair the damage immediately. Pipes usually crack when an individual digs too close to them or the water inside them freezes and thaws. Once you locate the damage, you will need to excavate the area and cut out a small section with a handsaw. You can then glue in a fresh section of pipe with two fittings and PVC cement.
An efficient sprinkler system is professionally designed to water your whole lawn without wasting water, which is good for the environment as well as your wallet. Every few months, take a quick glance at your sprinklers while they are on to make sure that they are spraying in the correct zones. If they need to be altered, then you can twist the top of the heads with a slotted screwdriver. The sprinklers need to be on while you are adjusting them, and you should plan on having a towel nearby because you will get wet.
Taking care of your lawn isn’t just about responding to problems as they arise — it’s about being on the lookout for problems before they ever become problems. In addition to these few tips and tricks, you also need to make sure that your lawn is properly fertilized and pest-free at all times. At least three or four times a year, you should fertilize the entire lawn and spray the edges for pests. You can also invest in a weed killing spray that doesn’t harm grass.
Need someone to help you install a water utility line for your new sprinkler system? Call the Drain Brothers for a free estimate today at 1 (262) 528-6466!